The classic treatment regulator exists in standard version with an ORP sensor, an oxydo reduction sensor in mV. A graphite pH sensor with glass body, a temperature sensor, a conductivity sensor and a flow detector or pressure detector comes to allow a global view for water quality before managing injection. The pro version comes with a free chlorine sensor to replace ORP , an amperometric electrochemical sensor that gives records in mg/L (DPD1) and a Chloramine sensor to calculate DPD3, a powerfull tool to manage water replacement in professionnal use. This autonomous Regulation can also be connected on pool or spa controller to be part of a bigger system with backwash valve, water level control, filtration and heating control...
The Dosing system is sold with a prepaid simcard valid for 10 years with 500 Mo. Bandwidth consumption is approximative 5 Mo / month, and each validate update cost 35 Mo. So we garantee 5 years at least. To top up 500 more Mo for 10 years, the cost is one shot 20€. It allow also a Wifi connexion and an ethernet port (RJ45) on pro version, and both has a modbus output as slave equipment.
Ph and ORP sensors are 24 month lifetime in normal condition. Free chlorine sensor is 3 years lifetime. temperature and conductivity are 5 years lifetime. Front panel dosing pump has 3000 hours lifetime
Globally we offer 3 years warranty on electronics. Sensors and consummables are exclued
In winter, if the water could reach 0°C, best practice is to unlock and empty the jar, disconnected the quick connector and put the whole analyzer in temperate environment
Yes, in fact the pro version is very accurate and can manage 0.4/1.4 mg/l French legislation or 0.3/0.6 mg/L German legistation, calculating active free chlorine from DPD1, to give professionnal user, easy water quality management.
the Analyzer has also a modbus output to be connected on any master like Pool controller, spa controller and dosing system. So yes with a little change the anayzer can be part of a bigger system.
